B0012 ENGINE TIMING TOOL SET-BMW (S54)

B0010 V-BELT REMOVAL / INSTALLATION TOOL–BMW (N47/N57TU/M47/M47TU/M47T2/...

B0021 BMW N55 CRANKSHAFT SEAL TOOL ((Installation))

B0021 BMW N55 CRANKSHAFT SEAL TOOL((Removal))

M0003 FREEWHEEL MECHANISM TOOL-MERCEDES-BENZ & BMW TW PAT. M495959 DE. 20 2014 009 687.2

◎Install between the wheel and tire,so the tire can be rotated freely.
◎ Manpower push only,not driving or towing (limited to 5 km/h)
◎Applications:BENZ-W164.W197.W204.W212.W221.W251
BMW-F01.F02.F07.F10.F11.F12.F13.F25.F30.F31.F32.F33.F34
◎OEM Ref:164589036300
◎PATENTED

M0019A TIMING TOOL SET-MERCEDES-BENZ(M270/M133/M274)

◎Used to position the camshaft in TDC position.
◎Applications:1.6L,V4 engine,A class and B class.
             New M270,M133,M274 engine.
◎OEM Ref:270 589 01 6100

M0020 INJECTOR REMOVER-MERCEDES-BENZ(M133/M152/M157/M270/M274/M276/M278)

◎Designed for removing the injector by slide hammer or the T bar.
◎Applications: Mercedes-Benz (M133/M152/M157/M270/M274/M276/M278)
◎OEM Ref: 278 589 00 33 00

M0027 HOLD-DOWN DEVICE-MERCEDES-BENZ (M642)

◎Used to align the camshaft timing angle for correct position.
◎OEM Ref: 642 589 00 31 00
◎Applications :Engine M642 CDI ENGINE

M0029A CHAIN LINK INSTALLER & REMOVER -MERCEDES-BENZ

◎The separating tool and the riveting tool allow quick, easy and safe splitting and reconnection of the timing-chains-both simplex and duplex-as well as the double-roller to be found on new Mercedes diesels from 9/95 onwards.

◎Applications: Mercedes petrol and diesel engines.

M0029 CHAIN LINK INSTALLER & REMOVER -MERCEDES-BENZ

◎The separating tool and the riveting tool allow quick, easy and safe splitting and reconnection of the timing-chains-both simplex and duplex-as well as the double-roller to be found on new Mercedes diesels from 9/95 onwards.
◎Applications: Mercedes petrol and diesel engines.

M0030 BALL JOINT INSTALLER / REMOVER-MERCEDES-BENZ

◎Special design to remove & install the ball joint on car , without remover any parts.
◎Applications:W220,W211,W230/W215
◎Please apply the hydraulic oil on the screw before using.

M0031 ALIGNMENT TOOL SET-MERCEDES-BENZ (M271)

M0032 CRANKSHAFT HARMONIC BALANCER PULLEY HOLDER-MERCEDES-BENZ(M271)

◎For removal and replacement of the crankshaft bolt.
◎Applications: M271

M0033 FUEL TANK LID REMOVER/INSTALLER-MERCEDES-BENZ &BMWFUEL TANK LID REMOVER/INSTALLER-MERCEDES-BENZ &BMW&VOLVO

M0035 AUTOMATIC TRANSMISSION CLUTCH SPRING COMPRESSOR

◎Used to remove and install the transmission rear clutch piston snap ring.
◎Applications: on most of American cars and light trucks.

B0001 REAR LOWER CONTROL ARM BUSH INSTALLER / REMOVER-BMW (E90) PAT. M479829

◎On car maintenance.
◎Special designed for replacement of the rear suspension differential bush.
◎Applications:BMW:E87,E90,E93,M3
◎Rubber mount number:33326763092,110867-10
◎OEM Ref:26643676

B0002 REAR SUSPENSION BUSH REMOVER / INSTALLER KIT-BMW(E87/E90) PAT. M466832

◎Extractor for replacement of the rear suspension mounting bushes.
◎Without completely lowering the rear axle assembly.
◎Applications:BMW E87,E90

B0021B FRONT CRANKSHAFT OIL SEAL REMOVAL / INSTALL KIT-BMW(N40/N42/N45/N45T/N46/N46T/N52/N53/N54)

◎For removing and installing the front shaft seals.
◎Applications:
BMW N40/N42/N45/N45T/N46/N46T/N52/N53/N54

B0021A CRANKSHAFT SEAL INSTALLER/REMOVAL-BMW(N55)

◎Used to install and remove the front crankshaft seal in BMW N55 engine.
◎Applications:BMW N55 engine.
◎OEM Ref:110370/119230
◎Oil seal number:7593353-05

B0021 CRANKSHAFT SEAL INSTALLER/REMOVER TOOL -BMW(N55)

◎Used to install and remove the front crankshaft seal..
◎Applications:BMW N55 engine.
◎OEM Ref:110370/119230
◎Oil seal number:7593353-05

B0022 CAMSHAFT ALIGNMENT TOOL-BMW (S63/N63)

◎Used to locate the camshaft in TDC position.
◎Checking and adjusting the timing chain tensioner.
◎Applications:BMW S63 engine on F10/M5(10~),F06/M6(11~),F12,13/M6 (11~)
E70/X5M(08~13),E71/X6M (08~13)
◎OEM Ref:2249117,2249140,2249144,2249159,2249162,118570,119190

B0024 V-BELT INSTALLATION TOOL-BMW (N52K)

◎Used to install the V-belt without causing damage.                                                              
◎Applications: BMW N52K engine (2006~2010)                                                                  
◎OEM Ref:111241、111242

B0026 FUEL INJECTOR INSTALL & REMOVE TOOL- BMW (N63/S63)

◎Used to install and remove the injector in N63 & S63  engine.                                                    
◎Application : BMW N63 & S63
◎OEM ref: 2 249 115

B0034 TIMING TOOL-BMW MINI

◎Installing and removal of camshaft / variable camshaft timing unit
◎Checking and adjustment of timing.
◎Applications:W10B16AA-2001-06 Cooper
                        W10B16BA-2001-06 Cooper S
                        W11B16AA-2001-06 One

B0035 TIMING TOOL-BMW MINI(N12/N14/N16)

◎The kit designed to set the twin camshaft on petrol engine of BMW MINI.
◎Applications:BMW MINI COOPER 1.4,1.6,16V(N12,N14/N16)
                        CLTROEN C4,C4 Picasso
                        PEUGEOT 207,308.

B0044 REAR SUB-FRAME DIFFERENTIAL BUSH INSTALLER / REMOVER -BMW(E46/E85)

◎Used to extract and install rear sub-frame and differential bushes.
◎Application: BMW (E46/E85)

B0052A EXHAUST CAMSHAFT REMOVER / INSTALLER - BMW (N51/N52/N53/N54/N54T/N55)

◎For pressing down the second cylinder and current less (dis)assembly of the exhaust camshaft.

◎Applications: BMW N51/N52/N53/N54/N54T/N55

B0055 TIMING TOOL SET-BMW(N63/S63)

◎Removing and installing/replacing inlet and exhaust adjustment units.
◎Checking camshaft timing, and adjusting timing.
◎Applications:
N63 ENGING
5’(F07/F10/F11),
6’(F12-650i(EUR 09-14), F12-650i(USA 10-14), F12-650iX(EUR10-14), F13-650i(EUR/USA 10-14) , F13-650iX(EUR10-14))
7’(F01,F02-750Li(EUR/USA 07-14), F02-750LiX(EUR07-14/USA 08-14),F02-ALPINA B7L ( 09-14) , F02-ALPINA B7LX( 10-12)) X’(E70 EUR/USA 09-13),E71(EUR/USA 07-14),E72(EUR 09-11,USA 08-11)
S63 ENGINE : X’(E70 EUR/USA 08-13),(E71 EUR/USA 08-14)

B0063B 21 PCS WHEEL LOCK SCREW REMOVAL KIT-BMW

◎20PCS WHEEL LOCK ADAPTER (SCM440 CHROME PLATED)

#30/13PT；#31/15PT；#32/16PT；#33/17PT；#3418PT WITH HOLD

#35/19PT；#36/20PT；#37/21PT；#38/22PT；#40/23PT WITH HOLD

#11/15PT；#12/14PT；#13/16PT；#14/12PT；#15/11PT

#16/10PT；#17/7PT；#18/13PT；#19/8PT；#20/9PT

1PC 1/2"DR WHEEL LOCK SOCKET 17MM*85MML

B0063C 20PCS WHEEL LOCK SCREW REMOVAL KIT-BMW

20PCS WHEEL LOCK ADAPTER ( CHROME PLATED)
#41,#42,#43,#44,#45,#46,#47,#48,#49,#50,#51,#52,#53,#54
#55,#56,#57,#58,#59,#60

B0065 INTERMEDIATE LEVERS REMOVER/INSTALLER SET- BMW MINI COOPER ( N12/N16/N18)

◎For removing and installing throttle return springs for intermediate levers.
◎Applications:N12/N16/N18,PEUGEOT 207,308,EP6 engine
◎OEM Ref:119571,119572

B0065A INTERMEDIATE LEVERS GUIDE BLOCK PLIERS- BMW MINI COOPER (N12/N16/N18)

◎For installing guide block.

◎Applications: BMW Mini Cooper (N12/N16/N18),PEUGEOT 207,308,EP6 Engine

◎OEM Ref:119573

B0066 FUEL INJECTOR REMOVER-BMW (N63/S63/N43)

◎For dismantling seized injectors.
◎Applications:BMW (N63/S63/N43)
◎OEM Ref:130 300

B0067 DIESEL ENGINE BALANCER SHAFT TIMING TOOLS-BMW (N47/N47S)

◎Special designed to time and lock the crank and balancer shaft when replacing the timing chain.( BMW N47/N47S 2.0 twin camshaft diesel chain drive engines, fitted in the 1 Series, 3 Series, 5 Series and X3)
◎Applications:
BMW; 1 Series, 118d (E81/E87), 120d (E81/E82/E87), 123d (E81/E82/E87). 3 Series, 318d (E90/E91), 320d (E90/E91/E92). 5 Series, 520d (E60/E61). X3, 2.0d (E83)
Engine Codes: N47, N47S
◎OEM Ref:118750,118790

B0068 FUEL LINE TOOL-MINI COOPER

◎Used to disconnect the fuel line from the high pressure fuel pump that is driven by the mechanical connection to the intake camshaft.
◎NOTE: SOME [2010.5-2011] MODELS, YOU NEED TO LOOSEN THE 14MM FLARE NUT ON THE FUEL RAIL FEED LINE AND REMOVE THE LOWER 8MM FUEL PUMP RETAINING BOLT TO USE THE TOOL
◎Applications:
2007-2013 Mini-Cooper JCW
2007-2013 Mini-Cooper S
2007-2013 Mini-Cooper S Clubman
2009-2013 Mini-Cooper S Convertible
2007-2013 Mini-S Countryman

B0070 REAR DIFFERENTIAL RUBBER MOUNT(FRONT) INSTALLER/REMOVER-BMW (F01/F02/F04/F06/F07/F10/F11/F12/F13/F18)

◎Used to replace all rubber mounts for rear axle final drive mounting at front.
◎Applications : BMW (F01/F02/F04/F06/F07/F10/F11/F12/F13/F18)

B0072 REMOVER / INSTALLER-BMW(F01/F02/F04/F06/F07/F10/F11/F12/F13/F18)PAT.M466832

◎This tool kit is designed to replace all rubber mounts for rear axle support.
◎Applications : BMW (F01/F02/F04/F06/F07/F10/F11/F12/F13/F18)

B0074 ENGINE TIMING TOOL SET-BMW (N62 & N73)

◎For checking /adjusting camshaft timing and locking flywheel in TDC position.
◎Applications :
BMW N62 & N73 engine
◎OEM Ref : 119461/119452/119340/117270/119451/113460/119454/119453/119190/119462/119463

B0075 ENGINE TIMING TOOL SET-BMW(M62)

◎Align flywheel on TDC position.
◎Applications:BMW M47T2,M54,M57TU,M57T2,M62,M62VANM67
●Parts#4&5:BMW(M62)VANOS CAMSHAFT TIMING TOOL.
◎For fixing camshaft sensor wheel in position during assembly
Applications:M62 VAN
●Parts #3:BMW(M62)VANOS TIMTIG HOOK.
◎For adjusting vanos to left stop during assembly as well for adjusting valve timing
●Parts #1:BMW(M62) ELECTROMAGNETIC VALVE SOCKET
●Parts #2:BMW(M62) VANOS TENSIONING BRACKET
◎For securing the camshaft chain tensioner.
◎Applications:BMWM62

B0076 CAMSHAFT ALIGNMENT TOOL-BMW (N47)

                                                  
◎Designed for the locking/positioning of camshafts and crankshaft.
◎Suitable for the 1.6, 2.0 or 3.0 l BMW engine such as BMW 1 Series, 3 Series, 5 Series, 7 Series, X1, X3, X5, X6; Mini Clubman, Countryman, Cooper D, Cooper SD, One D. (Engine codes: N47, N47-C16K1, N47-C16U1, N47-C20K1, N47-C20U1, N47-D20A, N47-D20C, N47-D20D, N47-D20K0, N47-D20K1, N47-D20O0, N47-D20O1, N47-D20U0, N47-D20U1, N47S-D20B, N47S-D20D, N47S-D20T0, N47T-D20K1, N47T-D20O1, N47T-D20U1, N57-D30A, N57-D30A0, N57-D30O0, N57-D30O1, N57-D30T0, N57-D30U0)
◎OEM Ref: 115320,118760,116480,118741,118742,113340

B0077 BALL JOINT PULLER-BMW

                                                    
■24MM & 31MM & 36MM
■FOR QUICK AND EASY SEPARATION OF BALL JOINT CONNECTIONS.
■APPLICATION:BMW E38,E39,E52,E53,E60,E61,E70,E83,E90,E91,E92,R50,R52,R53,RR1,RR2,X5
■24MM CAN USE FOR MERCEDES E-CLASS (W211),CLS (W219),S-CLASS(W220) AND SL(W230)、PORSCHE 996、AUDI A4  AUDI A6  CARRERA LOWER SUSPENSION BALL JOINT
■36MM CAN BE USED ON BMW(E70)

B0080 VANOS VALVE SOLENOID SOCKET-BMW(M62)

                                           
◎Vanos tool solenoid valve socket 32mm.
◎1/2" drive thin wall 32mm deep socket
◎For removing or installing Vanos Control Solenoids without damage
◎6cyl and 8cyl BMW engines (M54 and M62)

B0081 CAM TURNING SOCKET-BMW(M62)

◎For adjusting VANOS to left stop during assembly as well as for adjusting valve timing                     ◎Applications:M62 VANOS(1999-2002)
◎OEM Ref:116 440

B0086 WINDSHIELD WIPER ARM REMOVER-BMW

◎To remove BMW serial models windshield wiper arm
◎Support arms are adjustable to fit variety of automobiles.
◎Easy to use. Save your time.
◎Applications:E12,E21,E23,E24,E28,E30,E30/C,WAGON E30,E31,E32,E32/3,
E34,WAGON E34,E36,E36/2,E36/3,E36/5,E36/7,E36/C,EAGON E36,E38,E38/3
,E39,E39PL,WAGON E39,E46,E46/16,E46/2,E46/3,E46/5,E46/C,E52,E53,E60,
E65,E66,E67,E85,RR1.

B0088 TIMING TOOL SET-BMW(N43)

◎Installing and removal of camshaft and variable camshaft timing unit.
◎Checking and adjustment of timing.
◎Applications: E87:118i/120i-N43
                           E46:316i/318i-N43
                           E90/E91:318i/320i-N46
                           E85:Z4,2.0L-N46

B0082
MASTER FRONT & REAR CRANKSHAFT OIL SEAL REMOVER/INSTALLER SET-BMW (N40/N42/N45T/N46/N46T/N52/N53/N54/N55)
◎For removing and installing the front and rear shaft seals.
◎Applications: BMW N40/N42/N45T/N46/N46T/N52/N53/N54/N55

B0021BA
FRONT CRANKSHAFT OIL SEAL REMOVAL/INSTALL KIT-BMW(N40/N42/N45T/N46/N46T/N52/N53/N54/N55)

◎Used to loosen the seal for removal & installation of new front crank seals on BMW engines.

◎2008 - 2013 BMW - 128i

  2008 - 2013 BMW - 135i

  2006 - 2006 BMW - 325i

  2006 - 2006 BMW - 325xi

  2007 - 2012 BMW - 328Cic

  2013 BMW - 328i, xDrive

  2007 - 2012 BMW - 328i

  2007 - 2012 BMW - 328xi

  2006 - 2006 BMW - 330i

  2006 - 2006 BMW - 330xi

  2007 - 2010 BMW - 335Cic

  2007 - 2010 BMW - 335i

  2011 - 2013 BMW - 335is

  2007 - 2010 BMW - 335xi

  2006 - 2007 BMW - 525i

  2006 - 2007 BMW - 525xi

  2008 - 2011 BMW - 528i

  2008 - 2010 BMW - 528xi

  2006 - 2007 BMW - 530i

  2007 - 2010 BMW - X3, 3.0i

  2011 - 2012 BMW - X3 28i, xDrive

  2007 - 2010 BMW - X3 3.0si

  2007 - 2010 BMW - X5, 3.0i

  2008 - 2010 BMW - X6

  2006 - 2008 BMW - Z4, 3.0i

  2006 - 2008 BMW - Z4, 3.0si

  2013 - 2013 BMW - Z4 sDrive 35i

  2013 - 2013 BMW - Z4 sDrive 35si