NEW FLYER-NOV.

B0012 ENGINE TIMING TOOL SET-BMW (S54)

B0012 ENGINE TIMING TOOL SET - BMW(S54)

HEATER BLOWER MOTOR INSTALLATION/EXTRACTION TOOL-VOLVO

ITEM NO .: V0006

◎Used to install and remove heater fan, blower motor assembly.

◎Applications: VOLVO (4-dr) models:
S60 (S-60) T5 Sedan (2.5L L5 Turbo) - 2012 2013
S60 T6 (T-6) Sedan (3.0L L6 Turbo) - 2011 2012 2013
S80 (S-80) Sedan (4.4L V8) - 2007 2008 2009 2010
S80 3.2 Sedan (3.2L L6) - 2007 2008 2009 2010 2011 2012 2013
S80 T6 Sedan (3.0L L6 Turbo) - 2008 2009 2010 2011 2012 2013
V70 (V-70) 3.2 Wagon (3.2L L6) - 2008 2009 2010
XC60 (XC-60) 3.2 Sport Utility (3.2L L6) - 2010 2011 2012 2013
XC60 3.2 R-Design (R Design, RDesign) Sport Utility (3.2L L6) - 2011
XC60 T6 Sport Utility (3.0L L6 Turbo) - 2010 2011 2012 2013
XC60 T6 R-Design Sport Utility (3.0L L6 Turbo) - 2010 2011 2012 2013
XC70 (XC-70) 3.2 Wagon (3.2L L6) - 2008 2009 2010 2011 2012
XC70 T6 Wagon (3.0L L6 Turbo) - 2009 2010 2011 2012 2013
◎OEM Ref:9997284

CAMSHAFT ALIGNMENT TOOL (T6)-VOLVO

ITEM NO.: V0007
◎Special designed to align the engine camshaft and crankshaft position and correct into the side cover. 
◎Applications:
VOLVO S80, XC90, XC60, XC70 3.0T, 3.2 (T6 Engine) since 2007,Land Rover, Jaguar
◎OEM Ref:
9997257,9997261,9997263,9997264,9997271,9997272,9997266,9997267

FUEL SENDER LOCK NUT WRENCH-TOYOTA & LEXUS(Dr.1/2’’,9 POINTS)

ITEM NO .: TY002
◎Used to remove and install plastic fuel tank lock rings.
◎TOYOTA fuel pump gauge retainer:77144-04010,77144-52040,77144-48020 (Lexus)
◎Applications:
Corolla; 2004-2014; CE, ECO, ECOSW, LE, S, STD, XR, XRS; 4 Cyl 1.8L, 4 Cyl 2.4L
Land Cruiser; 2008-2014; 8 Cyl 5.7L
Matrix; 2004-2014; CE, LE, S, STD, XR, XRS; 4 Cyl 1.8L, 4 Cyl 2.4L
Tacoma; 2005-2014; 4 Cyl 2.7L, 6 Cyl 4.0L
Yaris S ,Yaris Base; 2007-2011; 1.5L L4 
VIOS ; 2014~
Lexus ; RX330 2004-2006 ;6 Cyl 3.3L, 6 Cyl 3.5 L

      RX350 2007-2014 ; 6 Cyl 3.3L, 6 Cyl 3.5 L

      RX450h 2010-2014 ; 6 Cyl 3.5 L

CRANKSHAFT PULLEY HOLDER-SUBARU

ITEM NO.: S0006
◎Designed to extract and install the crankshaft pulley on Legacy 2500 c.c.and Forester.

CAMSHAFT TIMING REMOVER/INSTALLER TOOL SET-PORSCHE

ITEM NO.: P0003
◎Used to Remove and install camshafts (includes setting timing)
◎Applications: 911 Carrera S Cabriolet (997) F6-3.8L (2007)
◎OEM Ref: 9595/1,9772,9773,9775

SERPENTINE BELT TOOL SET-BMW MINI COOPER

ITEM NO.: B0073

◎For Removing A/C compressor drive belt

◎Applications :

R52 /W11 engine-2004~2008 (EUR/USA)

R53 /W11 engine-2002~2006(EUR/USA)

◎OEM Ref : 118 410/118470

TIMING TOOL SET-BMW (M52TU/M54/M56)

ITEM NO.: B0069
◎Special designed to adjust camshaft timing.
◎Applications:BMW (M52TU/M54/M56)

CLUTCH CENTRE INSTALLER/REMOVER-BMW

ITEM NO.: B0057
◎For centering double-plate clutch on engine.
◎Applications:M6 E63, M5 E60, E61 (S85 engine)
◎OEM Ref:212 300 

EXHAUST CAMSHAFT REMOVER / INSTALLER - BMW (N51/N52)

ITEM NO.: B0053

EXHAUST CAMSHAFT REMOVER / INSTALLER - BMW (N51/N52/N53/N54/N54T)

ITEM NO.: B0052
◎For removing and installing/replacing exhaust camshaft.
◎Application: BMW (N51/N52/N53/N54/N54T)

INTAKE/EXHAUST CAMSHAFT REMOVER / INSTALLER –BMW (N53/N54/N54T)

ITEM NO.: B0050
◎Used to remove and install intake / exhaust camshaft.
◎Applications: Valve Spring Depressor-BMW(N53/N54)
                         Thrust Blocks (6 PCS)-BMW(N51/N52/N53/N54)
◎OEM Ref: 118 550

CRANKSHAFT HUB LOCKING TOOL-BMW (N12/N14/N40/N42/N45/N46/N52)

ITEM NO.: B0039
◎For the crankshaft when releasing/tightening the central bolt.
◎Applications: BMW (N12/N14/N40/N42/N45/N46/N52)
◎OEM Ref: 119 280

 

FRONT AXLE CONTROL ARM RUBBER MOUNT REMOVER/INSTALLER-BMW (R50/R52/R53/R55/R56/R57/R58/R59)

ITEM NO.: B0056

◎Used to replacing rubber mount in left or right control arm

◎Applications: BMW MINI R50/R52/R53/R55/R56/R57/R58/R59

◎OEM Ref:315 150

REAR DIFFERENTIAL RUBBER MOUNT INSTALLER/REMOVER-BMW (F01/F02/F04/F06/F07/F10/F11/F12/F13/F18)

ITEM NO.: B0048

Replacing rubber mount for rear differential mounting at rear.

Applications:

Model	Chassis	Year
5’	F07	2009-2014
	F10	2010-2014
	F11	2010-2014
	F18	2011-2014
6’	F06	2009-2014
	F12	2009-2014
	F13	2010-2014
7’	F01	2007-2012
	F02	2011-2014
	F04	2008-2012

OEM Ref:330 030(330 031-036)

FUEL TANK LID WRENCH - BMW (F01/F02/X3/F25)

ITEM NO.: B0040

◎Used to remove and install fuel tank/pump.

◎Applications: BMW (F01/F02/X3/F25)

◎OEM Ref: 161 190

VIBRATION DAMPER REMOVER/INSTALLER-BMW (N47/N57)

ITEM NO.: B0038

◎Used to remove and replace vibration damper on N47,N57 engine.

◎Applications: BMW N47/N57

TIMING PIN-BMW (M47T2/M54/M57TU/M57T2/M62 /M62VAN/M67)

ITEM NO.; B0037

◎Secure crankshaft with special tool B0037 in TDC firing position of first cylinder.

◎Applications: BMW (M47T2/M54/M57TU/M57T2/M62/M62VAN/M67)

◎OEM Ref: 115 180

RIGID CHAIN TENSIONER TOOL-BMW

ITEM NO.: B0036

◎For tensioning primary chain when adjusting valve timing.

◎Applications:

M52

1996-1999 328i

1997-98 525i, Z3

1998-99 323i

M52TU

1999-2000 323i, 328i, 528i

1999-02 Z3

M54

2001-05 325i, 330i

525i, 530i, X5 3.0i

2001-02 z3

2003-04 Z4

2004-05 X3

M56

OEM Ref:114 220

INJECTOR REMOVER-BMW (N53/N54)

ITEM NO.: B0031

◎Used to remove injectors in N53,N54 engine.

◎Used in conjunction with B0049 slide hammer M8 x 1.25

◎Applications: BMW N53/N54

◎OEM ref: 130 180

HOLD-DOWN DEVICE-MERCEDES-BENZ

ITEM NO.: M0027

◎Used to align the camshaft timing angle for correct position.

◎OEM Ref: 642 589 00 31 00

◎Applications :

Engine 642

CAMSHAFT FITTING TOOL SET- VW/ PORSCHE

ITEM NO.: P0001

◎For fitting camshafts in cylinder head.

◎Application : Audi A4 2001 >, Audi A6 2005 >, Audi A8 2003 > 6-cyl. TDI Common Rail 2.7l and 3.0l 4 valve engine 8-cyl. TDI Common Rail 4.0l 4 valve engine. Porsche.

◎OEM Ref: T40094A (T40094 (P0001), T40095(P0001-A) and T40096(P0001-B))

V6 CRANK LOCKINGPIN(M12XP1.5)- VW/AUDI

ITEM NO.: A0010

◎For locking the crankshaft at the TDC position when replacing

the timing belt

◎OEM Ref: V6 V8 engine

V6 CRANK LOCKING PIN(M18XP1.5)- VW/AUDI

ITEM NO.: A0009

◎For locking the crankshaft at the TDC position when replacing timing

belt or removing crankshaft bolt.

◎OEM Ref: V6 V8 engine

TORX T100 SOCKET - MERCEDES-BENZ

ITEM NO.: M0026

◎Used to remove and replace the camshaft adjuster central valve. With 1/2"

 drive, Length 100mm.

◎271 589 00 10 00

               

WHEEL LUG SOCKET-MERCEDES-BENZ

ITEM NO.: M0025

◎For Mercedes C-Class / GLK (W204), E-Class (W211, W212, W207), SLK (W172), M-Class (W164, W166), CL-Class (W216), S-Class (W221, W222) and Maybach. It is specially designed to loosen and tighten the new special wheel bolts found on Mercedes vehicles.

◎Total length : 87 mm

◎Dr.1/2''

◎Size: MS 17

FUEL INJECTOR INSTALL & REMOVE TOOL- BMW (N63)

ITEM NO.: B0026

◎Used to install and remove the injector in N63 engine.

◎Application : BMW N63

◎OEM ref: 2 249 115

TIMING TOOLS-PORSCHE 997

ITEM NO.: P0002
◎Alignment Fixture - Locks camshaft at Top-Dead-Center so that the cams can be accurately aligned.
◎Crankshaft TDC locking pin

FUEL TANK LOCKING RING TOOL-VOLVO

ITEM NO.: V0004
◎Used to remove and install  fule tank locking ring.
◎ Application: V70 (00-), S80, XC90, S60, V70 XC (01-) / XC70. Used on the following engines: B5204T4, B5204T5, B5234T3, B5234T7, B5244S, B5244S2, B5244S6, B5244SG, B5244SG2, B5244T3, B5244T4, B5254T2, B6284T, B6294S, B6294S2, B6294T, B6304S3, B8444S, D5244T, D5244T2, D5244T3, D5252T MSA 15.8, and B5204T3.

CAMSHAFT ALIGNMENT TOOL-BMW (N55)

ITEM NO.: B0046
◎Special design to locate camshaft in TDC position.
◎Applications:BMW N55 engines.

REAR SUSPENSION BUSH REMOVER / INSTALLER-BMW (E53)

ITEM NO.: B0043
◎On car maintenance. Replacement of the mounting bushes without completely lowering the rear axle assembly.
◎Extractor for replacement of the rear suspension mounting bushes.
◎Applications: BMW E53

CAMSHAFT ALIGNMENT TOOL-BMW (N51/N52/N53/N54/N55)

ITEM NO.: B0033A
◎Special design to locate camshaft in TDC position.
◎Applications:BMW N51/N52/N53/N54/N55 engines.

SERPENTINE BELT TOOL-MINI COOPER (N12/N14/N16/N18)

ITEM NO.: B0028
◎Special tool for releasing the tensioner when removing the Serpentine belt.
◎Compatible with all 2007 and newer Mini Cooper models equipped with the N12, N14, N16 and N18 engines.
◎Each set comes with a one large and one small 12 point wrench.
◎OEM ref: 116 210
◎ONLY SOLD AS A PAIR

VALVE SPRING REMOVER / INSTALLER-BMW (N13/N20/N26/N55)

ITEM NO.: B0008
◎Used to remove and install the pressure spring on intermediate lever.
◎Applications:BMW N13,N20,N26,N55
◎OEM Ref: 117110

REAR LOWER CONTROL ARM BUSH INSTALLER / REMOVER-BMW (E90) PAT. M479829

ITEM NO.: B0001
◎On car maintenance.
◎Special designed for replacement of the rear suspension differential bush.
◎Applications:BMW:E87,E90,E93,M3
◎Rubber mount number:33326763092,110867-10
◎OEM Ref:26643676

CRANKSHAFT OIL SEAL INSTALLER-MERCEDES-BENZ

ITEM NO.: M0005
◎Used to install front and rear seals of crankshaft.
◎Applications:BEZN M102,111,112,113,137,156,159,272,275,285,601,602,603,604,605,606,628,629
◎OEM Ref:119589011400,111589084300

DIFFERENTIAL BUSH INSTALLER / REMOVER-MERCEDES-BENZ(W212) PAT. M489112

 

ITEM NO.: M0007

◎For replacement of the rear sub-frame differential metallic bush.
◎Applications:BEZN :W166,W204,W207,W212,W216
W218,W221,W222,W231.
◎OEM Ref:204589014300,221589014300
http://www.zh-autotools.com/

ENGING TIMING TOOL SET-MERCEDES-BENZ AMG (M156)

ITEM NO.: M0013N
◎Used to fix and align the camshaft in correct timing angle while replacing the timing belt.
◎Applications:BENZ AMG156.ML63,S63L,S63,R63,E63,CLS63,and CLK63
◎OEM Ref:156589006100,156589003200
http://www.zh-autotools.com/

VACUUM PUMP SEAL CAP INSTALLER AND REMOVER-BMW(N51/N52)

ITEM NO.: B0007
◎Used to install or replace oil pump and vacuum pump .
◎Applications:BMW N51,N52
◎OEM Ref: 114360,110290
http://www.zh-autotools.com/

TIMING BELT PULLEY INSTALLER / REMOVER-MINI COOPER

ITEM NO.: B0018
◎Used to install and remove the crankshaft pulley.
◎Applications:MINI COOPER R53/W11
http://www.zh-autotools.com/

FUEL TANK LID WRENCH (Dr.1/2'',22 POINTS)-MERCEDES-BENZ (W164/W251)

ITEM NO.:M0018
FUEL TANK LID WRENCH (Dr.1/2'',22 POINTS)-MERCEDES-BENZ (W164/W251)
◎Used to remove the plastic fuel tank lid.
◎Applications:BENZ W164,W166,W251
◎OEM Ref:164589010700
http://www.zh-autotools.com/

BALL JOINT INSTALLER AND REMOVER SET-VOLVO

ITEM NO.: V0001
◎Special designed for lower control arm ball ioint removing and installing.
◎With 3 adapters: M12 x 1.75, M14 x 1.5, M 14 x 2.0(removing)
◎Applications:
VOLVO S60(01~10),S80(99~06),V70(00~07),XC70(02~07),
XC90(03~),XC60(09~)
◎OEM Ref:9995796
http://www.zh-autotools.com/

WHEEL HANGER LUG BOLT GUIDE TOOL (M14 x P1.25) -BMW

ITEM NO.: B0042
◎Installation and removal of wheels on BMW cars with lug bolts.
◎Aligning the holes in the wheel with the threaded holes in the wheel hub while inserting the first lug bolt is difficult. This tool is also useful for aligning wheel spacers or routine brake maintenance.
◎Save time when maintenance.
◎Applications:
BMW X5 E70-X6 E71 (2007-Present),BMW 7-Series F01-F02 (2010-Present),BMW 5-Series F10 (2010-Present),BMW X3 F25 (2010-Present),Mini Cooper R50-R52-R53 (July 06 - Present),Mini Cooper R55-R56-R57 (2006-Present)

WHEEL HANGER LUG BOLT GUIDE TOOL (M14 x P1.5) -MERCEDES-BENZ

ITEM NO.: M0023
◎Installation and removal of wheels on european cars with lug bolts.
◎Aligning the holes in the wheel with the threaded holes in the wheel hub while inserting the first lug bolt is difficult. This tool is also useful for aligning wheel spacers or routine brake maintenance.
◎Save time when maintenance.
◎Applications:
Mercedes-Benz,BMW,AUDI,Volkswagen,Porsche

WHEEL HANGER LUG BOLT GUIDE TOOL (M12 x P1.5) -MERCEDES-BENZ

ITEM NO.: M0022
◎Installation and removal of wheels on european cars with lug bolts.
◎Aligning the holes in the wheel with the threaded holes in the wheel hub while inserting the first lug bolt is difficult. This tool is also useful for aligning wheel spacers or routine brake maintenance.
◎Save time when maintenance.
◎Applications:
Mercedes-Benz,BMW,Mini Cooper,Smart,Volkswagen