2014年11月23日 星期日
2014年11月21日 星期五
FRONT SPRING COMPRESSOR-VOLVO
◎Used for fix the front suspension while replacing the hub,ball joint or bush,to prevent the rebound from the
spring.
◎Applications: VOLVO:S60(01~10),S80(99~06),V70(00~07),XC70(02~07),XC60(09~),XC90(03~)
◎OEM ref:9997256
HGV COOLING SYSTEM PRESSURE TEST KIT
ss%E6%B5%AE%E6%B0%B4%E5%8D%B0.jpg)
◎Designed particularly for testing pressure in the radiator for big trucks
◎Includes seven adapters,covering a majority of truck brands,DAF,MAN,Mercedes-Benz,IVECO,Renault,
Scania and Volvo
◎Connect the pressure tester pump with an adapter and then connected to the radiator filler neck.Pump pressure to the range between 10 and 15 psi,and see if the gauge pointer stays at the same position for approximately one minute or drops.If it dropped,there could be leaks in the radiator
FLYWHEEL TURNING TOOL-VOLVO (MP8,MP10)
◎Special designed to rotate the flywheel of crankshaft for
correcting the
timing position.
◎Applications: Volvo truck(MP8/MP10),(FH,D13A520)
◎OEM Ref:88800014
CRANKSHAFT SOCKET-SUBARU (1/2'')
◎Crankshaft rotating socket slips on over the crank snout enablesan engine builder to rotate a complete
CAMSHAFT SPROCKET HOLDER-SUBARU
◎Used to hold the Camshaft sprockets on 2005 and newer Subaru models with the 2.5L turbo and the 3.6L 6 cylinder engines.
◎Total length of the tool:475mm
◎OEM Ref:499977500
◎Applications:SUBARU 2.5L turbo,3.6L V6 engine.
CAMSHAFT FIXING TOOL-SUBARU
◎Used to fix the camshaft position.
◎Applications:
2002+ IMPREZA WRX (including STi) with 2.0L or 2.5L DOHC Turbo engines(EJ205,EJ507,EJ255,EJ257)
2004~11 Forester XT with DOHC Turbo engines
2005~10 Legacy GT with DOHC Turbo engines
2005~06 Saab 9-2X Aero with DOHC Turbo engines
2004~06 Baja with DOHC Turbo engines
BUSH REMOVER/INSTALLER-MERCEDES-BENZ (W201/W124/W202/W140/W129/W210/W220)
◎Removal and replacement tool for metallic bushes on rear axles.
◎Applications:(W201/W124/W202/W140/W129/W210/W220)
IGNITION LOCK REMOVER-MERCEDES-MERCEDES-BENZ
◎Used for removal and replacement of the ignition switch retaining ring.
◎Applications:W129,W140,W202,W210,W220,W203,W209,W211,W204.
ALIGNMENT TOOL SET-MERCEDES-BENZ(M137/M275/M285)
◎Used to position the camshaft in 30 degree TDC postion.
◎Applications:M137,M275,M285
TIMING TOOL SET-MERCEDES-BENZ(M157/M276/M278)
◎Used to align the camshaft timing angle for correct position.
◎Applications:BENZ M157,M276,M278 engine
◎OEM Ref:276589014000
TIMING TOOL SET-MERCEDES-BENZ (M270)
◎Used to position the camshafts in TDC position.
◎Applications:1.6L,V4 engine,A class and B class.
◎OEM Ref:270 589 00 61 00
ENGING TIMING TOOL SET-MERCEDES-BENZ AMG (M156)
◎Used to fix and align the camshaft in correct timing angle while replacing the timing belt.
◎Applications:BENZ AMG156.ML63,S63L,S63,R63,E63,CLS63,and CLK63
◎OEM Ref:156589006100,156589003200
http://www.zh-autotools.com
TIMING ALIGNMENT TOOL SET-MERCEDES-BENZ(M651)
◎The retaining device makes it possible to position the camshafts in the installed position.Also for turning,installing,and removing the crankshaft pulley.
◎Applications:BENZ M651 engine(07~)
◎OEM Ref:651589014000,651589004000
CRANKSHAFT PULLEY HOLDER TOOL-MERCEDES-BENZ(M272/M273)
◎Removal and replacement of the crankshaft bolt.
◎Applications:BENZ M272,M273
INJECTOR REMOVER-MERCEDES-BENZ(M271)
◎Used to remove the injector .
◎Applications:BEZN M271 (after 2007)
◎OEM Ref:271589023300
FLYWHEEL LOCKING TOOL-MERCEDES-BENZ (M651)
◎Used to hold the flywheel gear for removing and installing the crankshaft pulley centre bolt.
◎Applications: M651 diesel enigne
◎OEM Ref:651589024000
CRANKSHAFT OIL SEALS INSTALLER-MERCEDES-BENZ (M651)
◎Used to install front and rear seals of crankshaft.
◎Applications:BEZN M651 diesel engine.
◎OEM Ref:651589006100/651589016100
SUB-FRAME BUSH REMOVER / INSTALLER-MERCEDES-BENZ(W211/W219/W230)
◎Extractor for replacement of the front and rear metallic rear sub-frame mounting bushes.
◎Applications:BENZ W211,W219,W230
SUB-FRAME BUSH INSTALLER / REMOVER-MERCEDES-BENZ (W204) PAT.M466832
◎Removal and installation of rear rubber mounts of axle suspension.
◎Applications:BENZ W204
◎OEM Ref:2045890043
OXYGEN SENSOR SOCKET (Dr.3/8", 22mm)
◎Crowfoot wrench for oxygen sensors in exhaust manifolds of later model cars .
◎3/8 inch drive, 22mm
◎A cutaway slot to provide clearance for wiring harnesses. The socket provides adequate depth to fit over oxygen sensors.
UNIVERSAL INJECTOR REMOVER PAT. M463690
◎Used to remove the injector of petrol and diesel engine.
◎Two sizes of jaws are changeable for varies different injectors.
BUSH REMOVER/INSTALLER-BMW (E38/E39/E52/E53/E60/E61/E63/E64/E65/E66/E67/E70)
◎Removal and replacement tool for metallic bushes on rear axles.
◎Applications:BMW E38/E39/E52/E53/E60/E61/E63/E64/E65/E66/E67/E70
REAR SUB-FRAME DIFFERENTIAL END BUSH INSTALLER/REMOVER-BMW
◎On car maintenance.
◎For replacement of the suspension differential bush.
◎Applications: BMW E46,E85
FLYWHEEL HOLDER-BMW (M47T2/M47TU/M57TU/M67/N45/N45T/N46/N46T/N51/N52/N53/N54/W17)
◎Used to fix the flywheel while replacing timing chain.
◎It helps to release and tighten the central bolts on vibration damper.
◎Applications:BMWM47T2/M47TU/M57T2/M57TU/M67/N45/
N45T/ N46/N46T/N51/N52/N53/N54/W17
WINDOW REMOVAL WRENCH-MINI COOPER
◎Used to adjust the window seal tightness from the window generator.
◎Applications:MINI COOPER (R50/R52/R53/R55/R56)
◎OEM Ref:513240
TRANSMISSION INSTALL AND REMOVE TOOL SET-BMW 5L40-E
◎Used to assemble and disassemble the BMW and GM 5L40-E transmission.
◎Applications:
BMW E46:323i,328i,328ci,330d,330cd
BMW E39:525d,530d
BMW E53:X5 3.0
BMW E83:X 3.0
SATURN Sky CADILLAC:CTS,STS,SRX CHEVROLET:Omega
TRANSMISSION RUBBER MOUNT BUSH INSTALLER & REMOVER-BMW (X3/X5/X6)
◎Used to replace the rubber mount of BMW X3/X5/X6 transmission.
◎Applications:BMW:X3/E83 (2004-010), X5/E53 (2000-2007),
X5/E70 (2007-2013), X6/E71 (2008-2013)
ENGINE TIMING TOOL SET-BMW (S65)
ITEM NO.: B0015
◎Used to locate the camshaft in TDC position and correct the vanos angle.
◎Applications:BMW E90/M3-S65, E92/M3-S65
◎OEM Ref:119 970,115290,115320,115370
◎Used to locate the camshaft in TDC position and correct the vanos angle.
◎Applications:BMW E90/M3-S65, E92/M3-S65
◎OEM Ref:119 970,115290,115320,115370
TIMING TOOL SET-BMW (N20/N26)
ITEM NO.: B0014
◎Designed for fixing the camshaft in TDC position.
◎Use the tool to dismantle and assemble intake and exhaust camshaft.
◎Applications:BMW N20, N26 engine
◎OEM Ref:83 30 2 212 831 , 83 30 2 212 830 ,83 30 2 219 548 ,119340
http://www.zh-autotools.com
TIMING TOOL SET-BMW (N13/N18)
◎Use the tool to dismantle and assemble intake and exhaust camshaft and fix the camshaft at TDC position.
◎Applications:BMW N13, N18
◎OEM Ref:117440,119340,496709,119590
http://www.zh-autotools.com
ENGINE TIMING TOOL SET-BMW (S54)
◎For checking and setting camshaft timing while installing VANOS adjustment unit on S54 engines.
◎Applications:M3 cabriolet (00~06),sports coupe (99~06),CSL sports coupe (03~04)
◎OEM Ref:119140,119130,119170,117340,115100,117160,112300
http://www.zh-autotools.com
CRANKSHAFT LOCKING TOOL-BMW (N47/N57)
◎Suitable for BMW 2.0 N47 and 3.0 N57 diesel engines.
◎Without this tool the engine works irregularly.
◎OEM Ref:114320
http://www.zh-autotools.com
V-BELT INSTALLATION TOOL- BMW (N47/N57TU/M47/M47TU/M47T2/M57/M57TU/M57T2)
◎Used to install the V-belt without causing damage.
◎Applications:BMW M47T2,M47TU,M57T2,M57TU,N47,N57TU
◎OEM Ref:110330
http://www.zh-autotools.com
VALVE PRESSURE SPRING REMOVER / INSTALLER-BMW (N51/N52)
◎Used to remove and install pressure spring on intermediate lever.
◎Applications : BMW N51,N52
◎OEM Ref : BMW114270
http://www.zh-autotools.com
VALVE SPRING REMOVER / INSTALLER-BMW (N13/N20/N26/N55)
◎Used to remove and install the pressure spring on intermediate lever.
◎Applications:BMW N13,N20,N26,N55
◎OEM Ref: 117110
http://www.zh-autotools.com
VACUUM PUMP SEAL CAP INSTALLER AND REMOVER-BMW(N51/N52)
◎Used to install or replace oil pump and vacuum pump .
◎Applications:BMW N51,N52
◎OEM Ref: 114360,110290
FUEL TANK LID REMOVE TOOL-BMW
◎Used to remove the fuel tank lid.
◎Applications:BMW and Mini Cooper Model:1988-2011
E31,E34,E36,E38,E39,E46,E53,E60,E63,E64,E65,E83,E85,E90,R50,R52,R53,R55,R56 and R57
FUEL INJECTOR INSTALL &REMOVE TOOL-BMW(N55)
◎For injector installation and removal.
◎Applications:BMW N55 engine.
◎OEM Ref:130270
http://www.zh-autotools.com
FUEL INJECTOR INSTALL & REMOVE TOOL-BMW(N20/N26/N55)
◎For injector installation and removal.
◎Applications: BMW N20 ,N26 and N55 engines.
◎OEM Ref:130320
http://www.zh-autotools.com
A/C COMPRESSOR BELT INSTALLER-BMW (N62/W17)
◎Used to advance the belt into pulley of the compressor.
◎Applications: BMW N62,W17
◎OEM Ref:641040
http://www.zh-autotools.com
VALVE SPRING COMPRESSOR-VW/AUDI
◎Used to remove the valve springs of VAG cars.
◎Applications:4 cylinder 1.8L Turbo(5V) AUDI A4 and PASSAT B5 engines.
◎OEM Ref:3362
http://www.zh-autotools.com
2014年11月10日 星期一
CRANKSHAFT OIL SEALS INSTALLER-MERCEDES-BENZ (M651)
ITEM NO.: M0006
CRANKSHAFT OIL SEALS INSTALLER-MERCEDES-BENZ (M651)
◎Used to install front and rear seals of crankshaft.
◎Applications:BEZN M651 diesel engine.
◎OEM Ref:651589006100/651589016100
http://www.zh-autotools.com
訂閱：
文章 (Atom)